Filter
Top Products
Menu item Values Description
SET REGISTRATION PRINT TEST PAGE
SOURCE
ADJUST TRAY [N]
Allows simplex and duplex
image alignment.
Shifts the margin alignment to
center the image on the page
from top to bottom, and left to
right. You can also align the
image that is printed on the
front with the image that is
printed on the back.
PRINT TEST PAGE: Prints a
test page that shows the
current registration settings.
SOURCE: Allows you to select
the tray for which you want to
print the test page. If installed,
optional trays appear as
selections, where [N] is the
number of the tray.
ADJUST TRAY [N]: Sets the
registration for the specified
tray, where [N] is the number of
the tray. A selection appears
for each tray that is installed,
and registration must be set for
each tray.
● X1 SHIFT: Registration of
the image on the paper
from side to side, as the
paper lies in the tray. For
duplexing, this side is the
second side (back) of the
paper.
● X2 SHIFT: Registration of
the image on the paper
from side to side, as the
paper lies in the tray, for
the first side (front) of a
duplexed page. This item
appears only if an optional
duplexer is installed and
enabled. Set the X1 SHIFT
first.
● Y SHIFT: Registration of
the image on the paper
from top to bottom as the
paper lies in the tray.
The default for the SOURCE is
TRAY 2. The default for the
sub-items ADJUST TRAY 1
and ADJUST TRAY 2 is 0.
ENWW Configure device menu 39