Filter
Top Products
Chapter 4 Parameters|
4-88 Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11
Group 5: Multi-step Speeds Parameters
05.00 1st Step Speed Frequency Unit: 0.01
05.01 2nd Step Speed Frequency Unit: 0.01
05.02 3rd Step Speed Frequency Unit: 0.01
05.03 4th Step Speed Frequency Unit: 0.01
05.04 5th Step Speed Frequency Unit: 0.01
05.05 6th Step Speed Frequency Unit: 0.01
05.06 7th Step Speed Frequency Unit: 0.01
05.07 8th Step Speed Frequency Unit: 0.01
05.08 9th Step Speed Frequency Unit: 0.01
05.09 10th Step Speed Frequency Unit: 0.01
05.10 11th Step Speed Frequency Unit: 0.01
05.11 12th Step Speed Frequency Unit: 0.01
05.12 13th Step Speed Frequency Unit: 0.01
05.13 14th Step Speed Frequency Unit: 0.01
05.14 15th Step Speed Frequency Unit: 0.01
Settings 0.00 to 600.0Hz Factory Setting: 0.00
The Multi-function Input Terminals (refer to Pr.04.05 to 04.08) are used to select one of the AC
motor drive Multi-step speeds. The speeds (frequencies) are determined by Pr.05.00 to 05.14
as shown in the following.