Filter
Top Products
90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98
NGA 2000
6 - 15
Main Menu — Technical level configuration
↓↓
System set up
↓↓
Security codes
↓↓
In the menu "Record security codes" you can enable a security code for each the "Basic
controls", for the "Expert controls and set up" and for the "Technical level configuration".
Caution: If you enable a security code and forget it, you will not have any possibility
to enter the locked level!
How to record and to enable the security codes:
1) Determination of the code number for the:
♦ "Basic controls" (standard: 12345):
• Go to the line "Record basic level security code..." with the ↑↑ -key or the ↓↓ -key and
change to the corresponding submenu with the ENTER key or the →→ -key (see
illustration on the next page).
• Alternative: Press F2.
♦ "Expert controls and set up" (standard: 12345):
• Go to the line "Record expert level security code..." with the ↑↑ -key or the ↓↓ -key and
change to the corresponding submenu with the ENTER key or the →→ -key (menu
page is analogous to the one of the basic level, see illustration on the next page).
• Alternative: Press F3.
♦ "Technical level configuration" (standard: 54321):
• Go to the line "Record technical level security code..." with the ↑↑ -key or the ↓↓ -key
and change to the corresponding submenu with the ENTER key or the →→ -key (menu
page is analogous to the one of the basic level, see illustration on the next page).
• Alternative: Press F4.
HOME BASIC EXPERT TECH. INFO
CLD
F1 F2 F3 F4 F5
95.0 ppm
Record security codes
Basic level security: Disabled
Expert level security: Disabled
Technical level security: Disabled
Record expert level security code...
Record technical level security code...
Record basic level security code...
6.1.6 System set up
Security Codes