Filter
Top Products
4.1.1 Measurement - Multi Component Display:
Change of Channel
90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98
NGA 2000
4 - 3
DISPLAY STATUS MENU NEXT INFO
CLD
Sample press.:
Detector temperature:
Block temperature:
Converter temp.:
51.5 C
0.5 C
340 hPa
360 C
F1 F2 F3 F4 F5
0 250
95.00 ppm NOx
Range: 4
INFO
CLD
F1 F2 F3 F4 F5
SELECT STATUS TAGS OFF
MLT25/CH2/R2
ppm SO2
333.0
MLT25/CH3/R2
ppm NO
150.0
MLT25/CH4/R2
%O2
20.00
CLD
ppm NOx
95.00
MLT25/CH1/R2
ppm CO
45.00
INFO
CLD
F1 F2 F3 F4 F5
SELECT STATUS TAGS OFF
MLT25/CH2/R2
ppm SO2
333.0
MLT25/CH3/R2
ppm NO
150.0
MLT25/CH4/R2
%O2
20.00
CLD
ppm NOx
95.00
MLT25/CH1/R2
ppm CO
45.00
⇒ ⇒ Change to the multi
component display
Press
F1
Note:
You can change to the
multi component display
from each single
component display.
⇒ ⇒ Enable the selecting:
">"
Press
F1
or
Note:
If no channels of other
analyzer modules are
combined to the CLD,
only the bargraph of the
CLD module will be displayed.
Then, a change of channel
will not be possible !
⇒ ⇒ Select any channel
Press or
as often as necessary to
put the > - mark into the
selected line.
Example:
Change from
NO
X
(CLD) to
CO (MLT channel 1)