RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0)
161
Reviewing the Main Print Board Connections
Main Print Board (A000281) Location
Lid Sensor Assembly (830150); 2-Pin Connector. J4
Card Feed Assembly (830145); 4-Pin/2-Wire Connector. J9
Left Card Sensor Assembly (830135); 5-Pin/4-Wire Connector. J8
Ribbon ID Sensor Board Assembly (763173-2) 3-Pin/3-Wire Connector. J10
Headlift Motor Assembly (830143); 4-Pin/2-Wire Connector. J15
Magnetic Head Assembly (830190 or 830191) 10-Pin/10-Wire Connector. J18
Slotted Sensor Mount (Assembly 830149) 5-Pin/4-Wire Connector. J7
LED Board Assembly (830133) and Ribbon Sensor Board Assembly (830151);
4-Pin/2-Pin Connector each.
J12
Printhead Harness Assembly (830162-00); 3-Pin/2-Wire (Headlift Sensor
Switch).
J6
Card Feed Assembly (830145); 3-Pin/2-Wire Connector. J16
Printhead Harness Assembly (830162-00); 14-Pin Data Cable Connector. J13
Printhead Harness Assembly (830162-00); 2-Pin Connector, Cooling Fan. J3
Front Panel Board Assembly (830164); 6-Pin Connector. J2
Reviewing the Power Board Connections
Power Board (A000284) Location
Printhead Power J11
Stepper Motor J17
Ribbon Drive Motor J14