Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0)
16
Printer Components: Dye-Sublimation Print Ribbons
The Printer requires both specialized and authorized print ribbons in order to print and
function properly.
Step Procedure
1 Do not run the cards with a contaminated, dull or uneven surface through the
Printer.
Caution: Printing onto such cards will ultimately lead to poor print
quality and will greatly reduce the life of the Printhead.
2 Always store the card stock in its original packaging or in a clean, dust-free
container.
3 Do not print onto cards that have been dropped or soiled.
Caution: Printhead damage (caused by contaminated or poor quality
cards) will automatically void the Printhead's factory warranty.
4 a. Do not print over the area of the card with the punched slot if printing onto
cards with a pre-punched slot.
b. Avoid this area when printing by using the options in the Overlay/
Print Area
tab to omit printing in this area or punch the slot after the card has printed.
Continued on the next page