Filter
Top Products
208 Fortinet Inc.
Services Firewall configuration
Adding custom TCP and UDP services
Add a custom TCP or UDP service if you need to create a policy for a service that is
not in the predefined service list.
To add a custom TCP or UDP service
1 Go to Firewall > Service > Custom.
2 Select TCP/UDP from the Protocol list.
3 Select New.
4 Type a Name for the new custom TCP or UDP service. This name appears in the
service list used when you add a policy.
The name can contain numbers (0-9), uppercase and lowercase letters (A-Z, a-z), and
the special characters - and _. Other special characters and spaces are not allowed.
5 Select the Protocol (either TCP or UDP) used by the service.
6 Specify a Source and Destination Port number range for the service by entering the
low and high port numbers. If the service uses one port number, enter this number in
both the low and high fields.
7 If the service has more than one port range, select Add to specify additional protocols
and port ranges.
If there are too many port range rows, select Delete to remove each extra row.
8 Select OK to add the custom service.
You can now add this custom service to a policy.
TCP All TCP ports. tcp 0-65535
TELNET Telnet service for connecting to a remote
computer to run commands.
tcp 23
TFTP Trivial file transfer protocol, a simple file
transfer protocol similar to FTP but with no
security features.
udp 69
UDP All UDP ports. udp 0-65535
UUCP Unix to Unix copy utility, a simple file copying
protocol.
udp 540
VDOLIVE For VDO Live streaming multimedia traffic. tcp 7000-7010
WAIS Wide Area Information Server. An Internet
search protocol.
tcp 210
WINFRAME For WinFrame communications between
computers running Windows NT.
tcp 1494
X-WINDOWS For remote communications between an
X-Window server and X-Window clients.
tcp 6000-6063
Table 46: FortiGate predefined services (Continued)
Service name Description Protocol Port