Filter
Top Products
PPTP and L2TP VPN Configuring PPTP
FortiGate-4000 Installation and Configuration Guide 263
To connect to the PPTP VPN
1 Start the dialup connection that you configured in the previous procedure.
2 Enter your PPTP VPN User Name and Password.
3 Select Connect.
Configuring a Windows 2000 client for PPTP
Use the following procedure to configure a client computer running Windows 2000 so
that it can connect to a FortiGate PPTP VPN.
To configure a PPTP dialup connection
1 Go to Start > Settings > Network and Dial-up Connections.
2 Double-click Make New Connection to start the Network Connection Wizard and
select Next.
3 For Network Connection Type, select Connect to a private network through the
Internet and select Next.
4 For Destination Address, enter the IP address or host name of the FortiGate unit to
connect to and select Next.
5 Set Connection Availability to Only for myself and select Next.
6 Select Finish.
7 In the Connect window, select Properties.
8 Select the Security tab.
9 Uncheck Require data encryption.
10 Select OK.
To connect to the PPTP VPN
1 Start the dialup connection that you configured in the previous procedure.
2 Enter your PPTP VPN User Name and Password.
3 Select Connect.
4 In the connect window, enter the User Name and Password that you use to connect to
your dialup network connection.
This user name and password is not the same as your VPN user name and password.
Configuring a Windows XP client for PPTP
Use the following procedure to configure a client computer running Windows XP so
that it can connect to a FortiGate PPTP VPN.
To configure a PPTP dialup connection
1 Go to Start > Settings > Control Panel.
2 Select Network and Internet Connections.
3 Select Create a Connection to the network of your workplace and select Next.
4 Select Virtual Private Network Connection and select Next.