Filter
Top Products
Mar 00 Genicom Publication No. GEG-99054
microLaser 210 User Guide 4-9
Replacing Printer Components
9. Verify that the power switch of the printer is in the [O] (off) position, then insert the plug of
the power cord into the AC outlet.
10. Turn the printer on by pressing [ I ] on the power switch on the front of the printer.
Replacing Feed Roll, Nudger Roll, and Retard Roll
Rubber feed rolls drive sheets of paper out of the feeder paper trays into the printer. These feed rolls
wear with normal use and eventually become coated with paper dust and must be replaced. Fre-
quent feed jams in the front tray or main tray indicate that the feed rolls need to be replaced.
NOTE: The following procedure illustra.001dn130.12.3(u)10(1(b)4.5.08 th)-7.3(e)-275.7pdrt12.3(u)-12.3ufgurela.001d(c)-2.7(ing)-274.7n130.h(e)-275.7(f)-7.3(eed)-8-5.3(r)28(t)-0.3ll(,)-73(ur)28(e43.3(t5.08 (a.001dr)414.3(d)-8-5.3(r)28(t)-0.3ll(,)-73((a.001dnu)10(d)-8-5.3nh)-7.3uu)10(d)-5.3g(e)97r-)]TJ0 -121339 TD0.0004 Tc[ro29.1(ll)2763.6(orl)276334(t)-2.3(he)-7-7.3mainarlt.Toce t-eo29.1(lu)10783.6(orl)276334ad f80.4edcrl706.4(,)-8thecredc