Filter
Top Products
116 Chapter5
Changing Your Computer Hardware Configuration
Removable Media Devices
4. Remove both CD drive bracket screws (T-15 Torx/slotted screws) and
pull the CD drive bracket out of the chassis assembly as shown in
Figure 5-13. Next remove the four CD drive blank filler screws (T-10
Torx/slotted screws) as shown in Figure 5-13 and remove the blank
filler from the bracket. You are now ready to mount the CD drive into
the CD drive bracket. Note you will need the blank filler screws to
mount the CD drive.
Figure 5-13 Removing the CD Drive Bracket and Blank
CAUTION CD drives are susceptible to mechanical and electronic shock. When
handling the drive, always wear the static-grounding wrist strap that
came in the CD drive kit. Always handle the drive carefully.
Bracket Screws
Blank Filler Screws
CD drive Bracket
Blank
(T-10 Torx Screws)