Filter
Top Products
Chapter 5 129
Changing Your Computer Hardware Configuration
Removable Media Devices
4. Remove both floppy disk bracket screws (T-15 Torx/slotted screws)
and pull the floppy disk bracket out of the chassis assembly as shown
in Figure 5-26. Next remove the four floppy disk blank filler screws
(T-10 Torx/slotted screws) as shown in Figure 5-26 and remove the
blank from the bracket. You are now ready to mount the floppy disk
drive into the floppy disk bracket.
Figure 5-26 Removing the Floppy Disk Bracket and Blank
CAUTION Floppy disk drives are susceptible to mechanical and electronic shock.
When handling the drive, always wear the static-grounding wrist strap
that came in the floppy disk drive kit. Always handle the drive carefully.
Blank Filler Screws
Bracket
Screw
Blank
Bracket
(T-10 Torx Screws)
Blank Screw
(T-15 Torx Screw)