HP (Hewlett-Packard) b1000 Personal Computer User Manual


 
146 Chapter5
Changing Your Computer Hardware Configuration
Hard Disk Drives
3. Remove the four T-15 Torx shoulder screws from the hard disk drive
and bracket. See Figure 5-42. You should be careful when removing
the hard disk drive from its mounting bracket to avoid damaging it.
Note that in order to remove the T-15 Torx screws from the sides of
the hard disk drive you will have to have a T-15 Torx driver that is
long enough to fit through the access holes on the sides of the hard
disk drive bracket.
Figure 5-42 Removing the Hard Disk Drive from Its Bracket
Plastic Release
Lever
Plastic Release
Hook
Hard Disk Drive
Bracket
T-15 Torx
Should Screw
Mounting
Grommet
(do not remove)
Hard Disk
Drive
Hard Disk
Drive Mountin
g
Screw Access
Hole