Filter
Top Products
118 Chapter5
Changing Your Computer Hardware Configuration
Removable Media Devices
7. Plug the audio, ATAPI and power cables into their appropriate
connectors. Note that the connectors are keyed for proper insertion.
See Figure 5-15. To help with plugging in the audio connector, you can
pull its cable through the back of the CD drive chassis to the front of
the CD drive chassis and connect it. Note that you should connect the
audio cable first.
Figure 5-15 Plugging in the Audio, ATAPI and Power Cables
8. Tighten the two CD drive bracket screws as shown in Figure 5-16.
The screws should be tightened using 6 inch-pounds of torque.
Figure 5-16 Tightening the Bracket Screws
Power Cable
ATAPI Cable
Audio
Cable
Ferrite Bead
Bracket
Screw
(hidden)
Bracket Screw