Filter
Top Products
142 Chapter5
Changing Your Computer Hardware Configuration
Hard Disk Drives
2. Open the hard drive slot by lifting the plastic release hook upward
and pulling outward on the release lever as shown in Figure 5-38. As
you pull outward on the release lever, the hard drive bracket will
come out of its slot.
Figure 5-38 Removing the Hard Drive Bracket
3. Mount the hard disk drive on the hard drive bracket using the four
T-15 Torx shoulder screws that are stored on the mounting bracket.
See Figure 5-38.
Plastic Release Hook
Release Lever
Two T-15 Torx Hard Disk Drive Mounting Screws
Two T-15 Torx Hard Disk
Drive Mounting Screws
Hard Disk Drive Bracket