Filter
Top Products
Chapter 5 121
Changing Your Computer Hardware Configuration
Removable Media Devices
2. Remove the CD drive bay’s rear cover by unscrewing the T-15
Torx/slotted screw as shown in Figure 5-18. Note that the CD drive
bay’s rear cover is located on the back of the removable media chassis
inside the system unit. Push the cover handle away from the back of
the removable media chassis approximately one inch. Next pull the
cover handle toward you. The audio, ATAPI and power cables are now
accessible to you. Disconnect these cables from the CD drive.
Figure 5-18 Removing the CD Drive Bay’s Rear Cover
Audio
Cable
Rear
Cover
T-15
Torx/Slotted
Screw
Rear Cover
ATAPI Cable
Ferrite Bead
Power Cable
Handle