Filter
Top Products
134 Chapter5
Changing Your Computer Hardware Configuration
Removable Media Devices
2. Remove the floppy disk drive bay’s rear cover by unscrewing the T-15
Torx/slotted screw as shown in Figure 5-31. Note that the floppy disk
drive bay’s rear cover is located on the rear of the removable media
chassis inside the system unit. Push the cover handle away from the
rear of the removable media chassis approximately one inch. Next
pull the cover handle toward you. Remove the floppy data and power
cables from their connectors.
Figure 5-31 Removing the Floppy Disk Drive Bay’s Rear Cover
T-15
Power Cable
Data Cable
Rear Cover
Torx/Slotted
Screw
Rear Cover Handle