Filter
Top Products
Chapter 5 137
Changing Your Computer Hardware Configuration
Removable Media Devices
5. Place the floppy disk blank in the floppy disk bracket and insert the
four floppy disk mounting screws (T-10 Torx/slotted screws) into the
bracket and tighten them using 6 inch-pounds of torque. See Figure
5-34.
Figure 5-34 Installing the Floppy Disk Blank and Bracket
6. Slide the floppy disk blank and its bracket into the system unit
chassis as shown in Figure 5-34.
Floppy Disk
Bracket
Floppy Disk
Mounting
Screws (there
Floppy Disk Blank
Bracket Screw
are four of them)