Filter
Top Products
182 Chapter6
The Boot Console Interface
Displaying and Setting the Monitor Type
The correct usage for setting the graphics configuration is:
monitor graphics_path type
where valid graphics_path parameters are:
graphics(1) Graphics adapter installed in slot 1
graphics(2) Graphics adapter installed in slot 2 (primary slot)
graphics(3) Graphics adapter installed in slot 3
graphics(4) Graphics adapter installed in slot 4 (secondary slot)
graphics(5) Graphics adapter installed in slot 5
graphics(6) Graphics adapter installed in slot 6
and type is the numerical monitor type. See “Setting the Monitor Type”
in a subsequent section for a list of types. For example, an HP
VISUALIZE-EG graphics card (A4977A) installed in option slot 2 would be
graphics(2). Note that you can have graphics(1) through
graphics(6) for your graphics_path; however, there are two preferred
I/O slots available for graphics cards in your computer. Those slots are
slots 2 and 4. Slot 2 is the primary graphics card slot, and slot 4 is the
secondary graphics card slot.