Filter
Top Products
Chapter 5 127
Changing Your Computer Hardware Configuration
Removable Media Devices
2. Remove the floppy disk drive bay’s rear cover by unscrewing the T-15
Torx screw as shown in Figure 5-24. Note that the floppy disk drive
bay’s rear cover is located on the rear of the removable media chassis
inside the system unit. Push the cover handle away from the rear of
the removable media chassis approximately one inch. Next pull the
cover handle toward you. The floppy data cable and power cable are
now accessible to you.
Figure 5-24 Removing the Floppy Disk Drive Bay’s Rear Cover
T-15
Torx/Slotted
Screw
Power
Cable
Data Cable
Rear Cover
Rear Cover Handle