Filter
Top Products
Chapter 5 147
Changing Your Computer Hardware Configuration
Hard Disk Drives
4. Replace the four mounting screws on the hard disk drive bracket to
store them for future use. Slide the mounting bracket into its hard
drive slot, and push inward on the release lever until the front of the
hard dive bracket is flush with the system unit and the release lever
snaps closed. See Figure 5-43. The front panel should now be replaced
as explained in the section “Closing the System Unit Front Panel” in
this chapter.
Figure 5-43 Replacing the Hard Disk Drive Bracket
Storage Locations for the
T-15 Should Screws
Release Lever
Plastic Release
Hook
Hard Disk
Drive Bracket