Filter
Top Products
Chapter 5 131
Changing Your Computer Hardware Configuration
Removable Media Devices
6. Slide the floppy disk drive and its bracket into the system unit
chassis as shown in Figure 5-27.
7. Plug the floppy power cable into its connector. Next, plug the data
cable into its connector. Note that the connectors are keyed for proper
insertion. See Figure 5-28.
Figure 5-28 Plugging In the Floppy Data and Power Cables
8. Tighten the two floppy disk drive bracket screws as shown in Figure
5-29. You will need to use 6 inch-pounds of torque to tighten them.
Figure 5-29 Tightening the Bracket Screws
Power
Cable
Data Cable
Ferrite Bead
Bracket
Screw
Bracket
Screw
(hidden)