Filter
Top Products
Replace supplies and parts
Supply replacement guidelines
Keep the following guidelines in mind when setting up the product.
●
Provide enough space above and in the front of the product for removing supplies.
●
Place the product on a flat, sturdy surface.
Change the print cartridge
When a print cartridge reaches the end of its estimated useful life, the control panel displays a BLACK
CARTRIDGE VERY LOW message. You do not need to replace the supply at this time unless print
quality is no longer acceptable. When the supply has reached this condition, the HP premium protection
warranty for that supply has ended.
The cartridge-life remaining is an approximation only, and it varies depending on the types of documents
you print and other factors.
You can configure the product to stop when the BLACK CARTRIDGE VERY LOW message displays.
The print cartridge might still be able to produce acceptable print quality. To continue printing, either
replace the supply or use the MANAGE SUPPLIES menu to reconfigure the product to continue printing.
For more information, see
Manage supplies menu on page 20.
CAUTION: If toner gets on clothing, wipe it off with a dry cloth and wash the clothes in cold water. Hot
water sets toner into fabric.
NOTE: Information about recycling used print cartridges is on the print-cartridge box. See Return and
recycling instructions on page 218.
TIP: To see an animation of this procedure go to this Web site: www.hp.com/go/ljp3010-replace-print-
cartridges.
1. Press the top-cover release button, and open the top cover.
2
1
3
2
1
3
2
1
3
2
1
3
122 Chapter 9 Manage and maintain the product ENWW