Filter
Top Products
reference guide
maintain your hp officejet
61
7 Move the print carriage latch down, and make sure the loops catch the
hooks. Snap the latch into place, then close the print carriage access
door.
8 If the error message still appears, remove and reinsert the printhead again
and close the print carriage access drawer.
9 If the error message still appears, replace the printhead as described in
the following section.
replace the printheads
If you experience print quality issues that cannot be resolved by cleaning your
printheads and you have verified that the printheads need to be replaced, you
may need to replace them. You may also see front-panel display messages that
indicate when individual printheads need to be replaced.
See the Support and Specifications booklet for information on ordering
replacement printheads.
1 Turn on the unit, then open the print-carriage access door by lifting the
handle until the door locks into place.
The print carriage moves to the center of the unit.
2 After the print carriage stops moving, release the gray print carriage latch
and then lift the print carriage to access the printheads.
GroPlusRG.book Page 61 Wednesday, October 16, 2002 1:16 PM