Filter
Top Products
reference guide
maintain your hp officejet
71
This selects the Status and Maintenance menu, then selects the Restore
Factory Defaults option.
The factory default settings are restored.
set the country or language
Usually, the language and country are set when you install the HP Officejet. If
you need to reset either the country or the language, use the following
procedure. The following table lists the available language codes.
Tip: If you accidentally choose the wrong language and are
unable to read the front-panel display, simply follow the first 3
steps using the keypad to choose the correct language. You may
also consider printing a Self-Test report to identify the country and
language that have been selected.
1 Press Menu.
2 Press 7, then press 7, then press Enter.
This selects the Status and Maintenance menu, then selects the Set Country
and Language option.
3 To select the language, you can do the following:
– Press until the desired language appears.
– Wait until the desired language appears on the front panel display.
4 Enter the two-digit number corresponding to the language on the keypad.
For example: for English, you would enter 11.
5 After entering the language, you are prompted to confirm that the
language you selected is the one you want.
6 Press 1 for Yes and 2 for No.
7 After the language is selected, you are prompted with all the countries for
that selected language.
Code Language
11 English
12 Espanol
13 Francais
14 Deutsch
15 Portugues
16 Nederlands
17 Italiano
18 Dansk
19 Suomi
20 Norsk
21 Svenska
GroPlusRG.book Page 71 Wednesday, October 16, 2002 1:16 PM