Filter
Top Products
Conductivity/Resistivity Analyzer/Controller
9782 Series Conductivity/Resistivity Analyzer/Controller - Operator’s Manual 7/9910-10
10.6 Entering a Password for Security
Introduction
I/O setup, configuration, calibration and maintenance functions can be password-protected. The
password can be any number between 1 and 9999. (When the password is zero, the operator will
not be prompted to enter a password.)
ATTENTION
The configurable password entered here is not the same as the special password needed to edit
the model number stored in memory as described in 10.5.
Procedure
Follow the procedure in Table 10-5 to enter a password.
Table 10-5 Procedure for Entering a Password
Step Screen Action
1
MENU
CONFIGURATION
CALIBRATION
MAINTENANCE
I/O SETUP
DIAGNOSTICS
| PREV | NEXT
Go to MAINTENANCE | INSTRUMENT SETUP |
SECURITY.
MAINTENANCE
OFFLINE FUNCTIONS
INSTRUMENT SETUP
LEAD RESISTANCE COMP
DIAGNOSTICS
| PREV | NEXT
INSTRUMENT SETUP
INSTURMENT TAGGING
PRODUCT INFO
SCREEN CONTRAST
SECURITY
RESET UNIT
DIAGNOSTICS
| |
2
PASSWORD SECURITY
ENABLE SECURITY: YES
PASSWORD: 0000
DIAGNOSTICS
| |
To enable the security function, select YES.
The current password will be displayed. It can be edited
using this screen.