Filter
Top Products
I/O Setup and System Configuration
7/99 9782 Series Conductivity/Resistivity Analyzer/Controller - Operator’s Manual 5-21
5.9 Selecting a Computed Value to Be Displayed
Purpose
The Analyzer/Controller can calculate and display a computed value. The available values are:
• RATIO: ratio between the values measured by the cells;
Cell
Cell
1
2
• DIFFERENCE: difference between the values measured by the cells;
Cell Cell12−
• %PASSAGE: computed percent passage:
Cell
Cell
x
1
2
100
• %REJECTION: computed percent rejection:
()x1
1
2
100−
Cell
Cell
• PPMCO2: computed parts per million carbon dioxide (standard range analyzers only)
Appendix B includes examples of applications using these values.
ATTENTION
If a computed value is used, it is significant which cell is considered “Cell 1” and which is
“Cell 2”. This must be taken into account when wiring the inputs. See 6.3 for details.
Procedure
Use the procedure in Table 5-9 to specify a computed value.
Table 5-9 Procedure for Specifying a Computed Value
Step Screen Action
1
MENU
CONFIGURATION
CALIBRATION
MAINTENANCE
I/O SETUP
DIAGNOSTICS
| PREV | NEXT
Go to CONFIGURATION | ADVANCED FEATURES |
COMPUTED VALUE.
CONFIGURATION
CAT/RETRANSMISSION
ALARMS
DISCRETE CONTROL
ADVANCED FEATURES
DIAGNOSTICS
| PREV | NEXT
ADVANCED FEATURES
CLOCK SETUP
COMPUTED VALUE
AUTO CLEAN
DIAGNOSTICS
| PREV | NEXT