Honeywell HX2 Personal Computer User Manual


 
Message Explanation and/or corrective action Level
PROCESSING
Exit password dialog-
cancel
Exiting password prompt w/cancel.
LOG_
PROCESSING
Exit password dialog-OK Exiting password prompt successfully.
LOG_
PROCESSING
Exit password timeout Exiting password timeout processing.
LOG_
PROCESSING
Exit restart app timer Processing is at the end of the timer function
LOG_
PROCESSING
Exit TaskbarScreenMode
Exiting the function that switches the screen mode back to normal operation for the
administrator.
LOG_
PROCESSING
Exit ToAdmin Exiting the function that handles the mode switch into admin mode.
LOG_
PROCESSING
Exit ToUser Exiting the user mode switch function.
LOG_
PROCESSING
Exit ToUser-Registry
read failure
The AppName value does not exist in the registry so user mode cannot be entered.
LOG_
PROCESSING
Exit verify password-no
pwd set
Exiting password verification.
LOG_
PROCESSING
Exit verify password-
response from dialog
Exiting password verification.
LOG_
PROCESSING
Found taskbar The handle to the taskbar has been found so that AppLock can disable it in user mode.
LOG_
PROCESSING
Getting address of
keyboard hook init
procedure
AppLock is retrieving the address of the keyboard hook.
LOG_
PROCESSING
Getting configuration
from registry
The AppLock configuration is being read from the registry. This occurs at initialization and
also at entry into user mode. The registry must be re-read at entry into user mode in case
the administration changed the settings of the application being controlled.
LOG_
PROCESSING
Getting encrypt pwd
length
The length of the encrypted password is being calculated. LOG_EX
Hook wndproc failure
AppLock is unable to lock the application. This could happen if the application being
locked encountered an error after performing its initialization and shut itself down prior to
being locked by AppLock.
LOG_ERROR
Hook wndproc of open
app failure
The application is open, but AppLock cannot lock it. LOG_ERROR
Hot key event creation
failure
The Admin applet is unable to create the hotkey notification. LOG_ERROR
Hot key pressed Processing the hotkey and backdoor entry LOG_EX
Hot key pressed Processing the hotkey and backdoor entry LOG_EX
Hot key set event failure
When the administrator changes the hotkey configuration the hotkey controller must be
notified. This notification failed.
LOG_ERROR
Hotkey press message
received
The user just pressed the configured hotkey.
LOG_
PROCESSING
4-58