Filter
Top Products
HX2 without Label
If the HX2 Bluetooth address bar code label does not exist, follow these steps to create a unique Bluetooth address bar code
for the HX2:
First, locate the HX2 Bluetooth address by tapping Start > Settings > Control Panel > Bluetooth > About tab.
Next, create
1
a Bluetooth address bar code label for the HX2.
The format for the bar code label is as follows:
l Bar code type must be Code 128.
l FNC3 character followed by string Uppercase L, lowercase n, lowercase k, uppercase B and then the Bluetooth
address (12 hex digits, no colons). For example, LnkB0400fd002031.
Create and print the label.
Scan the HX2 Bluetooth address bar code label with the Bluetooth bar code reader.
The devices are paired. The Bluetooth bar code reader responds with a series of beeps and LED flashes.
Note: After scanning the HX2 Bluetooth label, if there is no beep and no LED flash from the Bluetooth bar code reader, the
devices are currently paired.
See Also: "Bluetooth Beep and LED Indications"
1
Free bar code creation software is available for download on the World Wide Web. Search using the keywords “bar code
create”.
4-81