Filter
Top Products
Parameter Default Function
Tray Icon On
Determines if the Summit icon is displayed in the System tray.
Options are: On, Off
Hide Password On
When On, the Summit Config Utility masks passwords (characters on the
screen are displayed as an *) as they are typed and when they are viewed.
When Off, password characters are not masked.
Options are: On, Off.
Admin Password
SUMMIT(or
Blank)
A string of up to 64 alphanumeric characters that must be entered when the
Admin Login button is tapped. If Hide Password is On, the password is
masked when typed in the Admin Password Entry dialog box. The password
is case sensitive. This value is masked when the Admin is logged out.
Options are: none.
Auth Timeout 8 seconds
Specifies the number of seconds the Summit software waits for an EAP
authentication request to succeed or fail.
If the authentication credentials are stored in the active profile and the authen-
tication times out, the association fails. No error message or prompting for
corrected credentials is displayed.
If the authentication credentials are not stored in the active profile and the
authentication times out, the user is again prompted to enter the credentials.
Options are: An integer from 3 to 60.
Certs Path System
A valid directory path, of up to 64 characters, where WPA Certificate Author-
ity and User Certificates are stored on the mobile device when not using the
Windows certificates store. Ensure the Windows folder path currently exists
before assigning the path in this parameter. See Certificates for instructions
on obtaining CA and User Certificates.
Options are: none.
For example, when the valid certificate is stored as My Com-
puter/System/MYCERTIFICATE.CER, enter System in the Certs Path text
box as the Windows folder path.
Ping Payload 32 bytes
Maximum amount of data to be transmitted on a ping.
Options are: 32 bytes, 64, 128, 256, 512, or 1024 bytes.
Ping Timeout ms 5000
The amount of time, in milliseconds, that a device will be continuously
pinged. The Stop Ping button can be tapped to end the ping process ahead of
the ping timeout.
Options are: Any number between 0 and 30000 ms.
Ping Delay ms 1000
The amount of time, in milliseconds, between each ping after a Start Ping but-
ton tap.
Options are: Any number between 0 and 30000 ms.
Note: Tap the Commit button to save changes. If this panel is closed before tapping the Commit button, changes are not
saved!
6-19