Filter
Top Products
Equipment Identification
Operator Interface
Release F UMC800 Controller Installation and User Guide 7
4/01
Operator Interface
The UMC800 operator interface (Figure 3, Figure 4, and Figure 5) provides a graphic LCD display and a
monoplaner keyboard to allow operator access to all controller functions. The operator interface becomes
operational once a valid database is configured in the controller. Modification and customization of the
operator interface is performed using Control Builder software. With the software, data points can be
identified (tagged) using eight character names. Once named, these data points may be accessed by the
operator interface using a standard set of display formats and a predefined menu hierarchy. Customized
display access and the assignment of selected displays to keyboard buttons may be developed using Control
Builder software. Selected displays such as bargraphs, trends, and overview displays will require the user to
specify the individual data points to be represented on the display.
KB
1 2 3 4 5
F1
F2
F3
F4
ALARM
?
ESC
Figure 3 551 operator interface
1 2 3 4 5
F1
F2
F3
F4
ALARM
?
ESC
Figure 4 552 operator interface
7 8 9
4 5 6
1 2 3
0 . -
1 2 3 4 5 6 7 8
F1
F2
F3
F4
?
Honeywell
ESC
Figure 5 1041 operator interface