Filter
Top Products
Sending a Spool File 79
CTLCHAR(*NONE|*FCFC) specifies whether the data contains printer control characters.
CHLVAL(*NORMAL| (channel#1 line#1) ... (channel#12 line#12)) specifies the list of
channel numbers with their assigned line numbers. Note that CTLCHAR(*FCFC) must be
specified as a SYSOPTS parameter for this to be a valid parameter.
FORMFEED(*DEVD|*CONT|*CUT|*AUTOCUT) specifies the form feed attachments used
by the printer (4214, 5219, and 5553 printers only).
PRTQLTY(*STD|*DRAFT|*DEVD|*NLQ) specifies the quality of print produced.
DRAWER(1|2|3|*E1) specifies the source drawer to be used when you use automatic cut-sheet
feed mode.
FONT(*CPI|*DEVD|font-identifier) specifies the font identifier to be used for the spooled
output file.
CHRID(*DEVD|*SYSVAL| graphic-character-set code-page) specifies the character
identifier to use for the spooled output file.
PAGRTT(*DEVD|*COR|0|90|180|270) specifies the degree of rotation (clockwise from the
edge of the paper first loaded into the printer) of text on each page printed.
PRTTXT(‘print-text’) specifies a line of text to be printed at the bottom of each page printed.
Up to 30 characters enclosed in single quotes is specified.
JUSTIFY(0|50|100) controls the print positions of the characters on the page (in the spooled file)
so the right margin is regular.
DUPLEX(*NO|*YES|*TUMBLE) specifies whether the spooled output file is printed on one or
both sides of the paper.
SPOOL(*YES|*NO) specifies whether the data is sent to a spooled file prior to printing.
OUTQ(*JOB|*DEV|library-name/output-queue- name) specifies the output queue for the
spooled output file created.
FORMTYPE(form-type) specifies the type of form to use in the printer when the spooled file is
printed. The PAGESIZE parameter overrides this parameter.
COPIES(number-of-copies) specifies the number of copies to be printed. Valid values range
from 1–255.
MAXRCDS(maximum-records) specifies the maximum number of records that are placed in
the output queue. Valid values range from 1–500,000.
FILESEP(number-of-file-separators) specifies the number of blank separator pages to be
placed between each copy of the file printed.
HOLD(*YES|*NO) specifies whether the file is to be held on the output queue until released by
the user.
SAVE(*YES|*NO) specifies whether the spooled output file is to be saved on the output queue
once printed.
OUTPTY(*JOB|output-priority) specifies the scheduling priority of the file on the output
queue.
USRDTA(user-data) allows up to 10 characters of data to identify the spooled output file.
Refer to the IBM Sterling Connect:Direct Processes Web site at
http://www.sterlingcommerce.com/documentation/processes/processhome.html
for general
information on SMS support.
XTRAN( table-name) specifies the translation table to use. The named table object must exist in a
library that is in the session manager job library list or else the COPY step fails.