Filter
Top Products
Running a Remote Task 95
Required Parameters
The following two parameters are required when you use the CDRUNTASK command.
SNODE(remote-node-name)
specifies a 1–16 character alphanumeric name for the remote node.
SNODENVIRN(remote-environment-name)
specifies the remote environment to execute the task.
One of the next two parameters is required for the CDRUNTASK command. Each parameter lists the
environments for which they apply.
PGM(program-name)
specifies the RUN TASK program name on the remote node. The following environments can use this
parameter: OS/390, Microsoft Windows, Tandem, VM, and VSE
CMD(command)
specifies batch-capable i5/OS CL commands and parameters for a remote node. The maximum
number of permitted characters is 256. The following environments can use this parameter: i5/OS,
MS-DOS, Microsoft Windows, OpenVMS, UNIX, and Stratus VOS.
Refer to the IBM Sterling Connect:Direct Processes Web site at
http://www.sterlingcommerce.com/documentation/processes/processhome.html
for parameter values for the
remote node.
PLEXCLASS(user-defined class)
PNAME(name)
PNODEID(id, pswd, newpswd)
RMTWORK(*YES|*NO
)
SACCT(snode-accounting-data)
SNODEID(id, pswd, newpswd)
TRACEOPT
Trace Instructions:
(L,S,F,C,X,K,D,H,V,W,P|*NONE|*ALL|*EXT|
*COMMON|*INITPARMS|*CURRENT
Command Trace Options:
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON|
*NONE
)
Note: The CLASS parameter is not used by Sterling Connect:Direct for i5/OS.
Note: This value is case sensitive.
Command Parameters
†
For tasks on z/OS, Microsoft Windows, HP NonStop, VM, and VSE
‡ For tasks on i5/OS, Microsoft Windows, OpenVMS, UNIX, Stratus VOS
‡‡ For tasks on z/OS, HP NonStop, VM, and VSE