Filter
Top Products
Special copy and scan jobs 109
▼ Shift the image
1
Open the ‘Layout’ card in the ‘Copy’ section.
[58] Image shift
2 Press the ‘Shift’ function key and select a horizontal shift value by pressing the
numeric or arrow keys until the required distance is set to shift the image to the
left or to the right.
3 Press the ‘Shift’ function key again and select a vertical shift value by pressing
the numeric or arrow keys until the required distance is set to shift the image
upwards or downwards.
4 Make other settings as required.
5 Feed the original.
Note: You can use horizontal and vertical shift at the same time.
Mirror image
With the Océ TDS800 Scanner you can make a mirror image copy of an
original, as shown in the next figure:
[59] Example of a mirror-image copy