Filter
Top Products
Using the Océ TDS800 to print 35
The following keys are available:
Key types
Key Function
Selection
keys
The selection keys are located immediately below the graphical
display. The left key can be used to activate one of the main menu
choices (Language, Folding or
Media) on the left part of the display.
Note: A shadow highlighting effect is used to indicate the active
menu option.
The right selection key can be used to activate the options on the
right part of the graphical display.
Note: To identify the active selection, the dotted line around this
selection is changed into an uninterrupted line and the small
selection triangles next to the specified option are no longer
dimmed.
These selection triangles indicate that you can select an option
from a predefined list with the help of the arrow keys.
Arrow
keys
These two triangular keys to the right of the graphical display are
used to display the next or previous option from the selected menu
choice and to select the desired option.
On-line key By pressing the On-line key you can put the printer On-line or
Off-line. If the green light above the On-line key is on, the printer
is On-line; if this light is off, the printer is Off-line.
Stop key The red Stop key is used to stop the present print job. After this
key is pressed, a dialog is displayed asking for confirmation.
Note: The printing process does not stop instantaneously since a
number of prints may already have been submitted to the printer
after processing. The prints cannot be stopped.
Extra key This key is reserved for future use.