Filter
Top Products
192 Océ TDS800 User Manual
▼ Define the media type
1
Press the ‘On-line’ key on the printer operator panel to put the printer Off-line.
The message ‘Off-line’ is displayed in the status window.
2 Press the left selection key to shift the focus to the media selection.
3 Use the arrow keys to select roll 1, to 6 (see Figure 97).
4 Press the right selection key to select the setting you want to define.
5 Use the arrow keys to define the settings.
Note: The system detects the media size. Media sizes of both the DIN and
ANSI paper series are available. Use the Arrow buttons to select either a
DIN or ANSI format.
6 Put the printer On-line again by pressing the ‘On-line’ key.
[97] To set the correct media
7 When you are ready, you can continue your job.
Ready to print
Selection keys