Filter
Top Products
24 Océ TDS800 User Manual
[4] Power button on the Océ Power Logic
® Controller
▼ Turn the Océ TDS800 printer on and off
1
Turn the key to the ‘on’ position (see Figure 2).
The system takes about 20 minutes to warm up. When the system is warmed
up, the message ‘Ready to...’ appears on the printer operator panel.
2 Turn the key to the ‘off’ position (see Figure 2).
Note: Before you turn off the printer, make sure that the printer is not
printing a job.
▼ Turn the Océ TDS800 scanner on and off
1
Turn the key to the ‘on’ position (see Figure 3)
After a few seconds the message ‘Ready to print’ appears on the scanner
operator panel.
2 Turn the key to the ‘off’ position (see Figure 3).
▼ Start up the Océ Power Logic Controller
1
Turn on the controller and the screen.
After the initial system test of the controller the applications, Océ Queue
Manager, Océ System Control Panel, Océ Settings Editor and Océ Scan
Manager are automatically started and the controller applications are ready for
operation.
Note: The Océ Settings Editor is minimised to save screen estate.
Take the following actions to turn off the controller:
▼ Turn off the Océ Power Logic® Controller
1
Go to the Océ System Control Panel application.
2 Select the ‘Shutdown’ option from the ‘System’ menu.
3 Confirm shutdown by clicking on the ‘Yes’ button in the ‘Shut down’ window.