Filter
Top Products
208 Océ TDS800 User Manual
Maintenance of the Reinforcement Unit
The maintenance for the Reinforcement Unit contains:
■ Clear the waste box
■ Clean the reinforcement knives
Attention: Only use the original Reinforcement Strips from Océ, to prevent
the damage to the Reinforcement Unit.
Clear the waste box
If a reinforcement unit is installed, the protective sheet from the reinforcement
tape is stored in a waste box.
Note: You can clear the waste box while you print.
▼ How to clear the waste box
1
Pull the waste box to the left hand side and towards you to open the waste box
(see Figure 119).
[119] Open the waste box
2 Clear the box.