Filter
Top Products
38 Océ TDS800 User Manual
▼ Set media size
1
Press the ‘On-line’ key on the printer operator panel to put the printer Off-line.
The message ‘Off-line’ is displayed in the status window (see Figure 7).
2 Press the left selection key to shift the focus to the Media option.
A shadow effect is used to indicate that the focus is set to this option.
3 Use the arrow keys to select the roll or manual feed for which you have just
loaded new media.
4 Press the right selection key to activate the Size option.
The dotted line around the current selection is changed into an uninterrupted
line and the small selection triangles next to the specified size are no longer
dimmed.
5 Use the arrow keys to select the size for the media you just loaded.
The printer shows both DIN and ANSI sizes. Select the correct format.
6 Press the On-line key to put the printer On-line again. The printer now knows
which media size is used for the specified roll or manual feed.
Special media indication
On the Océ TDS800 Printer, you can attach a Special indication (exclamation
mark:!) to a roll or manual feed which uses special media (for instance colored
paper). This indication is used to identify the roll or manual feed to the printer.
For this roll or manual feed the automatic media change option is disabled.
▼ Set a special media indication
1
Press the ‘On-line’ key on the printer operator panel to put the printer Off-line.
The message ‘Off-line’ is displayed in the status window (see Figure 7 on
page 37).
2 Press the left selection key to shift the focus to the Media option.
A shadow effect is used to indicate that the focus is set to this option.
3 Use the arrow keys to select the roll or manual feed for which you have just
loaded special media.
4 Press the right selection key to activate the ‘Type’ option.
The dotted line around the current selection is changed into an uninterrupted
line and the small selection triangles next to the specified type are no longer
dimmed.
5 Use the arrow keys to select the Special option for the specified roll or manual
feed.
6 Press the ‘On-line’ key to put the printer On-line again. The printer now knows
that the specified roll or manual feed contains special material.