Filter
Top Products
Problem solving 221
4 Pull the green bar of the fuser section toward you to open the fuser section.(see
Figure 133)
[133] The bar of the fuser section
5 Take the crank found on the right hand cover of the paper output unit.
6 Insert the crank in the slot and turn to the right. The paper is delivered from the
paper output unit.
[134] The crank
7 If the paper keeps coming, it is not cut and you have to cut it manually.
8 Cut the paper and turn the crank to the right to deliver the paper.
9 Remove the crank and return it to its original position.
10 Pull the handle 1 towards you to open the pre-heater section (see Figure 135 on
page 222).
11 Pull the green handle 2 toward you and release handle 1 (see Figure 135 on
page 222).