Filter
Top Products
Océ Power Logic®: Settings Editor 135
In order to perform special System Administrator functions, you must log onto
the Océ Settings Editor as a System Administrator (see ‘User modes’ on
page 163).
Note: When you are finished, make certain you log off from the System
Administrator mode of the Océ Settings Editor to prevent unauthorized use of
the Océ TDS800.
▼ Make System Administrator settings in the Océ Settings Editor
1
Maximise the Océ Settings Editor on the screen.
2 log on as System Administrator.
See ‘User modes’ on page 163 for more information about logging into the
Settings Editor.
3 Click on one of the top buttons to display the desired group of settings.
4 Select the setting you want to update in the tree structure.
5 Update the setting in the update area, as required.
Note: A few settings, such as the default pen settings, are made directly
from the tree structure area.
6 Click on the ‘Apply’ button.
The new value is now applied for the setting
7 log off from the System Administrator mode when you are finished updating
settings.
Access the Océ Settings Editor
In order to perform special Key Operator functions, you must log on to the Océ
Settings Editor as a Key Operator.
As these functions are restricted to a dedicated Key Operator, a password is
required to access them. The service engineer will provide this password to
you upon installation.
Note: Only one user at a time is allowed to log on as a user authorised to
modify setting (Key Operator, System Administrator, Service Engineer). When
a second user tries to log on, an error message is displayed. Multiple users at
a time are allowed to view settings.