Filter
Top Products
Using the Océ TDS800 to print 33
▼ Select a language
1
Press the ‘On-line’ key on the printer operator panel to put the printer Off-line.
The message ‘Off-line’ is displayed in the status window.
2 Press the left selection key to shift the focus to the Language option.
A shadow effect is used to indicate that the focus is set to this option.
3 Activate the Language option by pressing the right selection key.
The dotted line around the current selection is changed into an uninterrupted
line and the small selection triangles next to the specified language are no
longer dimmed.
4 Use the arrow keys to switch between the predefined languages.
5 The language specific elements on the display are immediately customized to
reflect your language choice. Only the indicator for the language itself, is in
the alternative language. This way you always know what your alternative
language is.
6 Put the printer On-line again by pressing the ‘On-line’ key. The printer now
uses the selected language.
Display
The graphical display offers feedback about the current printer status. It
provides you with the following information:
■ Status information (e.g. ‘Preparing for run’, ‘Ready to print’, ‘Warming up’).
During normal operation the following message types may appear:
Status / action message: indicates the actual status of the printer plus the
action to be taken, e.g. ‘Roll empty. Feed A2, plain paper’.
Warning message: during a warning message the printer will continue to
operate, but it is possible that the print quality is not optimal, e.g. ‘Fill E1
toner’.
A graphical overview of available rolls and manual feeds, including the
material type and size used by each roll or manual feed.
■ An indication that a particular roll is empty.
An empty roll is represented by a dotted roll symbol.
■ In the event of an error, a graphical representation of any error location
(cover or panel), together with instructions on how to solve the problem is
displayed.