Filter
Top Products
Using the Océ TDS800 to print 37
▼ Set media type
1
Press the ‘On-line’ key on the printer operator panel to put the printer Off-line.
The message ‘Off-line’ is displayed in the status window.
[7] The Printer Operator panel in Off-line mode
The focus shifts to the Media option (indicated by the shadow effect).
2 Use the arrow keys to select the roll or manual feed for which you have just
loaded new media.
3 Press the right selection key to activate the Mat. (Material) option.
The dotted line around the current selection is changed into an uninterrupted
line and the small selection triangles next to the specified material are no
longer dimmed.
4 Use the arrow keys to select the material you just loaded.
5 Press the ‘On-line’ key to put the printer On-line again. The printer now knows
which material is used for the specified roll or manual feed.
▼ Set media type for manual feed
1
Press the ‘On-line’ key on the printer operator panel to put the printer Off-line.
The message ‘Off-line’ is displayed in the status window.
2 Press the left selection key to shift the focus to the Media option.
A shadow effect is used to indicate that the focus is set to this option.
3 Use the arrow keys to select the Manual option.
4 Press the right selection key to activate the Mat. (Material) option.
The dotted line around the current selection is changed into an uninterrupted
line and the small selection triangles next to the specified material are no
longer dimmed.
5 Use the arrow keys to select the material you just loaded.
6 Press the ‘On-line’ key to put the printer On-line again. The printer now knows
which material is used for manual feed.
Ready to print
1 A1 Paper
3 A0 Paper
5 36 Paper
2 A2 Paper
4 A3 Paper
6 A0 Paper