Filter
Top Products
186 Océ TDS800 User Manual
▼ Adjust the punch unit
1
Open the front door of the high capacity output unit of the folder.
2 Turn the black knob to adjust the folding width (see Figure 89). Refer to the
sticker inside the unit.
[89] Knob to adjust the folding width in the punch unit
3 Loosen the screw and place the plate according to the folding length (see
Figure 90).
[90] Nut to adjust the folding length in the punch unit
4 Tighten the screw.
Belt full detection
The Océ TDS800 has a belt full detection on both belts. The attention light on
the printer operator panel will go on if the belt is full. The system can switch
belts when the first belt is full. You can set after how many jobs the belt is full.