Filter
Top Products
269
EPA ENERGY STAR
®
Introduction
Océ-Technologies B.V. has joined the ENERGY STAR
®
Program of the United
States Environmental Protection Agency (EPA). The purpose of the E
NERGY
S
TAR® Program is to promote the manufacturing and marketing of
energy-efficient equipment, thereby potentially reducing combustion-related
pollution. Using the energy management features outlined below prevents
unnecessary power consumption, which helps to prevent air pollution from
electricity generating plants and saves money on your utility bills.
As an E
NERGY STAR® Partner, Océ-Technologies B.V. has determined that the
below-mentioned configurations of the Océ TDS800 meet the E
NERGY
S
TAR® guidelines for energy efficiency:
■ Océ TDS800 Printer, consisting of printer, controller and monitor.
■ Océ TDS800 Scanner.
The Océ TDS800 Multifunctional Digital System, consisting of Océ TDS800
Scanner and Océ TDS800 Printer including controller and monitor, has the
same efficiency features but does not meet the E
NERGY STA R® specification
for the sleep mode of a multifunctional device.
Features
The ENERGY STAR® Criteria involve following features.
■ low power mode
The Océ TDS800 Printer, TDS800 Scanner and TDS800 Multifunctional
Digital System enter automatically the low power mode 15 minutes after
completion of the last job. The Key Operator can adjust the low power mode
default time between 15 and 240 minutes.
■ sleep mode
The Océ TDS800 Printer and TDS800 Multifunctional Digital System enter
automatically the sleep mode 90 minutes after completion of the last job. The
Key Operator can adjust the sleep mode default time between 15 and 240
minutes.
During the sleep mode of the Océ TDS800 the controller remains in operation.
It is suggested to determine the appropriate default times for your work pattern
by changing the setting in steps of 30 minutes and testing each setting for at
least a week.