Filter
Top Products
166 Océ TDS800 User Manual
Language
From the ‘View’ menu, select ‘Language’, to select one of the supported
languages.
Note: The check mark in front of the language indicates that this is the active
display language.
▼ Set the languages
1
From the ‘View’ menu, select ‘Language’.
To change the language in the scanner and printing operator panels, change the
display language setting in the Océ Settings Editor.
Help
▼ Display help information
1
Open the ‘Help’ menu and select ‘Contents’.
Here you find help information for all applications and functions of the Océ
TDS800 applications.
Command line parameters
In order to start the remote applications faster, there are 6 command line
parameters available.
configfile=<config_file> Sets the configuration file to use.
server=server Sets the specified server as the server to connect to.
language1=lang Specifies the first language in combination with the
parameter ‘country1=country’
.
country1=country
Specifies the first language in combination with the
parameter ‘language1=language
’.
language2=lang
Specifies the second language in combination with the
parameter ‘country2=country’
.
country2=country
Specifies the second language in combination with the
parameter ‘language2=language
’.