Filter
Top Products
Using the Océ TDS800 to Copy 49
Sections on the display of the scanner operator panel
When the job templates are enabled, the scanner operator panel displays the
templates (see Figure 9). You need to select a template before the sections will
display.
[9] The job templates at the bottom of the scanner operator panel.
When the job templates are disabled or you selected a job template, the scanner
operator panel displays the following sections with an active ‘Custom’ section
(see Figure 10 on page 50).
■ The ‘Custom’ section which provides direct access to frequently used
settings, defined by the customer.
■ The ‘Original’ section which provides access to the settings of the scanner
input, the original.
■ The ‘Print’ section which provides access to the settings of the printer output,
the print.
■ The ‘File’ section which provides access to the settings of the scan-to-file
output, the file.
Custom section
The ‘Custom’ section contains the frequently used settings. Figure 10 on
page 50 shows an example with the following settings.
■ Zoom
■ Input mode
■ Output