95
Troubleshooting
No free memory segment was found
The resource selection in the driver was unable to find a 4KByte block of
memory available for the driver's use. Check to ensure that a 4KByte block
of memory is excluded from any memory managers present. If the error
persists, use the MEMORY keyword to force a known address that's
available, and use the NOCHECK keyword to disable resource verification.
No network cable was detected. Line speed will be detected at run
time
A network cable was not detected, or a cable fault occurred. The driver was
unable to determine the speed of the network and will attempt to detect the
correct speed as soon as a network link is established.
PCI BIOS is not present
The drivers require PCI BIOS to be installed in the system. Check with the
laptop manufacturer to verify that it supports PCI BIOS calls.
PCI IRQ routing unavailable - the driver is using ISA IRQ routing
If the driver cannot set or verify an interrupt through the PCI BIOS, it will
use ISA IRQ routing and display this message.
Please specify 0, 4, 8, 16, or 32 for the CACHE keyword
The CACHE keyword sets the cache line size on the CardBus bridge and
the PRO/100 CardBus adapter. This parameter should not normally be
modified.
Please specify a decimal number below 256 for the LATENCY
keyword
The LATENCY keyword sets the latency timer on the CardBus bridge and
the PRO/100 CardBus adapter. This parameter should not normally be
modified.
Please specify a hexadecimal number for the MEMORY keyword
The value specified for the MEMORY keyword must be a hexadecimal
number. For NDIS 3 use the form 0xD0000. All others use D0000.