40
CHAPTER2
13 Change to the LANMAN directory on your hard disk or boot disk.
14 Use a text editor to modify the PROTOCOL.INI file in the C:\LSP
directory as follows:
• Under the ETHERAND section, change the line that reads
BINDINGS = TCMAC2
to read:
BINDINGS = INTELNET
• Underneath that section insert a new section that reads:
[INTELNET]
DRIVERNAME = INTEL$
15 Use a text editor to edit the keyword settings in the PROTOCOL.INI
file in the C:\LSP directory to match the keywords contained in the
sample PROTOCOL.INI file located at C:\INTEL\M32A as required
(unless you are using PRO/100 CardBus adapter default settings).
16 Save the file and reboot the PC.
IBM PC LAN and IBM DOS LAN Requester
1 Install the IBM LAN Support Program according to the instructions
under the heading “IBM Local Area Network Support Program,”
which immediately precedes this one.
2 Reboot the PC.
3 Install IBM PC LAN or IBM DOS LAN Requester according to the
instructions in the IBM documentation.
4 Reboot the PC.