Filter
Top Products
18
CHAPTER2
Installing with Windows NT 3.51 and 4.0
Windows NT 3.51 and 4.0 include full support for PC Cards and partial
support for CardBus. The PRO/100 CardBus adapter includes a driver that
will let you use the device within Windows NT. When loaded, this driver
disables support for PC Cards in Windows NT. This means you cannot
simultaneously use another CardBus or PC Card with the PRO/100
CardBus adapter.
Please review the README.TXT file on the Installation Disk and visit the
Intel website for the latest information on CardBus support in Windows
NT.
The installation steps for Windows NT 3.51 and Windows NT 4.0 are
slightly different, so they are addressed separately here.
To install with Windows NT 3.51:
1 Insert the PRO/100 CardBus adapter.
2 Double-click the Control Panel.
The Control Panel opens.
3 Double-click the Network icon.
The Network Settings window opens.
4 Click Add Adapter.
The Add Network Adapters window opens.
5 Scroll to select “Other (requires disk from manufacturer).”
6 Click Continue.
The Insert Disk windows opens.
7 Insert the Intel Network Drivers Disk .
8 Click OK.
The Select OEM Option window opens.
9 Click OK.
10 Intel EtherExpress PRO/100 CardBus Mobile Adapter Setup window
opens, displaying the default settings.
NOTE:
In most circumstances, the default settings will properly operate the PRO/100
CardBus adapter. However, consult the README.TXT file for specific settings (if
necessary).