Intel PRO Network Card User Manual


 
33
Software Installation
FTP Software PC/TCP
Packet, NDIS 2.0, and ODI Drivers
FTP Software’s PC/TCP Generic Ethernet Kernel ETHDRV.EXE can be
installed using Intel’s Packet, ODI, or NDIS drivers. PC/TCP can also be
used concurrently with NetWare. For information on which driver is
appropriate for your network environment, see the FTP PC/TCP
documentation. For environments using values other than those set by the
Intel Installation Program, see Chapter 3, Configuration Reference in
this manual.
FTP PC/TCP 3.X with OnNet 1.1 and Windows for
Workgroups 3.11
1 Run the Intel Installation Program from the Installation Disk.
2 From the Select Network Operating System screen, choose Windows
for Workgroups then FTP PC/TCP 3.x.
3 Follow the prompts to complete the Intel segment of the installation.
4 Run the PC/TCP installation program OnNet 1.1.
5 Follow the prompts to the Network Card Screen, then select “Other
NDIS Driver or Updated Packet Driver.”
6 Insert the Intel Network Drivers Disk when prompted.
7 Choose the appropriate driver then follow prompts to complete the
installation.
8a For NDIS installation, reboot the PC.
8b For ODI installation, do not reboot. Continue with step 9.
Additional Steps for ODI Installation
If you are using an ODI driver, continue with the following steps:
9 Change to the directory into which PC/TCP was installed.
10 Use a text editor to change the file PCTCP.INI as follows:
In the section PCTCP ifcust 0 change the line
INTERFACE-TYPE=NDIS
to read
INTERFACE-TYPE=PKTDRV.
11 Save the file and exit the text editor.
12 Change to the C:\ (root) directory.